|
XR750 Harley replica
fiberglass tank. 2.5 gallon capacity, billet cap. Mounts with 2 studs on
side of tank. Just weld a horizontal tab on your frame for secure
mounting. $375. |
|
XR750 Harley replica
fiberglass seat. We solid-mount the tank with a bracket on the frame,
welded in both front and back, we secure the seat with the upholstery
fasteners from the bottom. $130.
|
|
Saddlemen dirt track
upholstery. Trick perforated vinyl material with 1" of dense padding
attached to a plastic seat base. This is what the pro's use. Mounting kit
includes velcro & 4 fasteners $100.
|
More Yamaha Photos |
Our painters can make
your tracker look like the glory days of King Kenny & Bob Hannah with factory Yamaha race graphics
and competition yellow paint, or... |
More Kawasaki Photos |
for the
Kawasaki triple lover, how about lime green with factory Kawasaki race graphics.
With our spec paint & graphics you'll evoke memories from every hard
core enthusiast of the day. Paint & graphics start at $675.
|
 |
The wheels are what
makes a street tracker. Big 2.50x19 Excel aluminum rims with big
stainless steel 8ga. spokes shod with Continental Milestone dirt track
tires is the ticket for the serious street tracker. Lace your own, or
send us your hubs & we'll do it.
|
 |
In the rear you'll need
to gear down with a Sprocket Specialists 44 tooth aluminum sprocket and
a DID gold X-Ring chain in a 520 conversion for less weight. Uni number
plates for the dirt track look. Suspension
is handled by Works gasser shocks in either steel or aluminum body.
|
|
To fit that big tire
you'll need a Moto Carrera aluminum swingarm. Strong, light and
beautiful.
|
|
Right-exit, dirt track
Millennium GP exhaust is hand fit to tuck tight. Also available in kit
form if you want to cut & weld them yourself.
|
|
For the Kawasaki triple
tracker we stock Jemco old-school chambers in kit form. Yes, there's
enough room for all 3 to fit on the right. Cafe racers can tuck 2&1 as
tight as they want. Most welding is already done.
|
 |
Motors & engine
modifications from mild to wild. We have powerplants ready to go or we
can modify your cylinders & heads to yield exciting horsepower & torque.
|
|
The 2002 Yamaha R1 LED
tailight is the perfect fit for the XR seat. Super-bright red when on,
white when off. Very light weight & self-contained for easy mounting.
|
|
Baja Designs headlight
& switch
kit with Moto Carrera number plate handles DOT-legal
lighting chores. Bars are Flanders dirt track A24 bend. Throttle is
Motion Pro Turbo, master cylinder is by Magura with Moto Carrera steel
braided brake line.
|
Photo
by Jay McNally